Gaurang Electronic Industries
Mumbai, Maharashtra
GST No. 27AAAPB9964C1ZV
TrustSEAL Verified
Call 08048966924 70% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
| Gaurang | 1 |
DIN Rail Mounting Bracket
DRB20
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
| Operating Temp | -25 to 70 C |
| Gaurang | Enclosures |
DIN Rail Mounting Bracket
DRB45-2
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
| Enclosures | Gaurang |
DIN Rail Mounting Bracket
DRB35-2
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
| Gaurang | Din Rail Bracket |
DIN Rail Mounting Bracket
DRB48-1
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
DIN Rail Mounting Bracket
DRB35-1
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Module Width | 2 Module |
| Material | Polyamide |
| IP Rating | IP65 |
| DIN Rail Type | TH35 |
| Mount Type | DIN Rail |
| Color | Black |
DIN Rail Mounting Bracket
DRB20-2
Mounting on 35mm Din Rail
The DIN Rail Mounting Bracket provides a fast, secure, and stable solution for mounting electrical devices and equipment. Ideal for solid-state relays, circuit breakers, and distribution or meter cabinets on 35mm rails. Designed for a snug fit, it ensures devices remain firmly in place, reducing movement and vibration to improve performance and lifespan. Made from high-quality PA66+30%GF Nylon, the bracket is built for daily use and longevity. Features multiple drill holes and varied patterns, supporting enclosures and devices without DIN rail clips.
|
Features |
|
|
● Mounting on 35mm DIN rail ● Spring-loaded design enables quick and easy mounting and removal ● Suitable for a wide range of electrical devices and equipment, including solid state relays, circuit breakers, and distribution and meter cabinets ● Available in three different widths: 48mm, 35mm, and 20mm
|
● Material: PA66+30%GF Nylon ● Color options: Black, Grey ● Tool-free mounting on a 35mm wide DIN rail without additional effort ● Several mounting holes patterns & designs available
|
Installation and Removal Method: Lift & Pivot
Installation and removal of these brackets are straightforward. The clips are easily attached and detached from the DIN rail, gripping both the top and bottom lips of the rail when in place. The solid, fixed (non-spring-loaded) tab is positioned on the top of the rail to bear the load, while the spring-loaded tab secures the bottom. To remove the clip, simply lift upwards to compress the latch springs, pivot the top of the clip off the rail, and then lower it away. No screwdrivers or special tools are required for this tool-free process.
Hardware & Mounting Hole Options
M4 Countersunk flat Philips head screws are used to fasten the bracket to the device. The mounting holes have a 4mm diameter, specifically designed for M4 hardware, providing secure and stable attachment.
Additional Information: